Step by Step
Guide – Removing Scratches from your Watch Glass
Maintaining a watch is maybe even more important than buying one. You need the right tools and the correct techniques to ensure that you’re doing it effectively. Alternatively, you should get it serviced once a year at least. Scratches may emerge from time to time, giving rise to the need for removing them immediately. They’re an eye-sore aesthetically, and don’t allow you to best represent the watch’s natural charm.
Here’s how you can remove scratches easily from your watch glass:
Preparing the watch
Prior to removing the scratches from the watch, you need to use the right preparation techniques. You need to protect the overall finish on the watch case so that you can buff the surface. Whether you buy men’s watches online or at a store, they warrant care and rehabilitation as per their materials and make.
You can take a bit of polyimide tape and cover the metal around the surface. This is important so that you don’t end up polishing the straps or the metal casing. You should overlap the pieces of tape so that there isn’t any extra space left out.
Arranging the buffing system
The next step in the process is to set up the buffing system for the scratch removal. You can use a polishing motor and attach your buff to the spindle. Alternatively, you may use a microfiber cloth. Safety goggles, at this point, are good to own as you need to get precise with your actions.
You can start the motor off and apply a thin layer of polishing compound on the spinning wheel. This should cover the entire surface and ensure that you’re getting scratches off as efficiently as possible. You may get this done at authorised shops that sell and service the best watch brands for men and women.
Engage the polishing process
It’s time to let the spinning buffer interact with the watch surface. Since you’ve covered the casing and the strap well, the polishing would only be limited to the exposed surface. By applying medium pressure, you can focus on the scratched area to eliminate them from the surface. You can even change positions and reduce the pressure to get a more evenly spread out polish. It’s important to protect your fingers while you’re performing this process as there could be a chance of over-pressure or application errors.
Removing scratches from your favourite watch doesn’t have to be a complex task. It takes precision and the right tools and is a part of the regular maintenance required for premier watches. To minimize the risk of scratches, it’s best to go for legacy brands that offer extensive warranties.