3 Chemical Used in Lubricants and Its Safety Instructions

Chemicals play an important role in many different industries including lubricants and metal working. Right from increasing viscosity of lubricants to reducing friction between metal workpieces and cutting tools, chemicals play a large number of roles in these industries.

Just like all the other chemicals, the chemicals used in lubricants and metalworking industry should be used carefully to avoid any calamity. To ensure enhanced safety, 3 of the most commonly used chemicals in these industries along with their safety instructions are mentioned below.

1. Glycol Ether

Glycol ether has a lipophilic-hydrophilic nature which allows it to couple oil and water mixtures in lower concentrations to facilitate the formulation of homogenous, clear fluids. Moreover, it is also excellent when it comes to reducing the viscosity of solvents in aqueous media. This allows them to minimize the surface tension of these solutions to disrupt foam formation and improve wetting. Moreover, they are also highly stable in several pH ranges.

Handling Instructions of Glycol Ether

Make sure you go through MSDS of Glycol Ether to ensure safe handling of this chemical. Some of the key instructions are:

  • Hands should be thorough washed after working with glycol ether.
  • Protective clothing, protective gloves, face protection and eye protection should be worn when using this chemical.
  • If there is an eye contact, rinse the eyes thoroughly with water. Get medical aid if the irritation continues.

2. Acetic Acid

Acetic acid is a carboxylic acid which is very commonly used in producing the ester. Another important use of this chemical is for producing VAM (Vinyl Acetate Monomer). VAM is a building block which is used in a wide range of consumer and industrial products. It is also an important ingredient in resins, polymers, adhesives, coatings, acrylic fibers and textiles. Food grade acetic acid is also very commonly used in the packaged food industry.

Handling Instructions of Acetic Acid

Some of the key handling instructions according to the MSDS of Acetic Acid are:

  • If a person has inhaled acetic acid, they should be instantly taken to an open area with fresh air.
  • Medical attention is highly recommended if the chemical comes in contact with the skin.
  • If there is an eye contact, rinse the eye thoroughly with water for several minutes.

3. Phosphoric Acid

The most common use of phosphoric acid is for manufacturing phosphates which are used as fertilizers. It is also an important ingredient for manufacturing synthetic detergents and is also used as an additive in animal feed. Food producing, beverage production and as a cleaner for removing rust and minerals in industrial settings are some other uses of phosphoric acid. The chemical is available in many different concentrations for different applications.

Handling Instructions of Phosphoric Acid

It is necessary for the handler to go through MSDS of Phosphoric Acid. Some important conclusions of this sheet are:

  • If phosphoric acid is inhaled, the victim should be instantly taken to an open area with fresh air. Administer oxygen if the victim is not able to breathe properly. If at all the victim is not breathing, CPR should be administered.
  • If the chemical comes in contact with the skin, quickly wipe the excess chemical from the skin and wash the affected area with water and soap for 15 minutes.
  • If there is eye contact, wash the eyes with a gentle stream of water for at least 15 minutes.

Remember the safety instructions mentioned above when using these chemicals to avoid severe consequences and create a safer working environment.